Double Direction Thrust Ball Bearings

 

 

Designation

Boundary Dimension(mm)

Basic load ratings

Limiting Speed

r/min

Mass

New Code

Old Code

d

d1min

D

D1max

H

B

rsmin

r1min

Ca(KN)

Coa(KN)

Grease

Oil

(Kg)

52234 38234 150 173 240 239.5 97 21 1.5 1.1 445 1488 520 700 13.5
52334 38334 150 174 280 279 153 33 3 1.1 702 3204 - - 37.2
52236 38236 150 183 250 249 98 21 1.5 2 230 825 - - 15.6
52336 38336 150 184 300 299 165 37 3 2 400 1440 - - 48.8
52238 38238 160 194 270 269 109 24 2 2 280 1020 - - 21.5
52240 38240 170 204 280 279 109 24 2 2 560 2056 - - 20.9
f802 f802 370 400 460 459 80 20 1.5 1.5 200 645 - - 25.5

 

Double direction thrust ball bearings
LYNBC thrust ball bearings are separable, i.e. the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore. LYNBC thrust ball bearings are produced as single direction or double direction thrust ball bearings and angular contact thrust ball bearing. They are designed to accommodate axial loads only and must not be subjected to any radial load. 
  Double direction thrust ball bearings can carry axial loads in double directions, but it can not carry radial load. LYNBC double direction thrust ball bearings can make an axial location in two directions. LYNBC double direction thrust ball bearings also have planar housing washer and self-aligning seat washer. Generally, planar housing washer cannot allow any angular error, however, when designing bracing structures, a gap of 0.5~1mm between the outer diameter of housing washer and the fitting surface of bearing block can be kept to correct the angular errors, which, would be made when mounting. Self-aligning housing washer need to be ordered and manufactured separately.
LYNBC can provide thrust ball bearings with other special structures, such as thrust ball bearings without cages, unidirectional thrust ball bearings with taper bores, unidirectional thrust ball bearings with steel wire raceway and etc. All the types cannot be listed in this catalogue. 
 ▲ LYNBC can design and manufacture many other similar structures in accordance to the special and particular requirements of their customers’. If our customer’s have specific requests then the customer should identify the structure, and mounting dimensions that are required. Please contact the LYNBC Technical Center if you need any assistance in this area.
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
  • Product Name:
  • *Company Name:
  • *Your Name:
  • *E-mail:
  • Tel./ Fax.:
  • Country:
  • Picture / File:
  • *Content:
  • .
Contact Us
Luoyang Nice Bearing Co.,Ltd.
Leave a Message
Please leave a message,and we will immediately answer your questions.
Company Name:
*Your Name:
*E-mail:
County:
*Content:
.
Copyright © 2015 Luoyang Nice Bearing Co.,Ltd. All rights Reserved. Privacy Policy Powered by MetInfo